EEPROM Programmer
Read, edit, write and verify 24-series EEPROMs with a CH341A, right in your browser. New here? Set up the CH341A first.
Read, edit, write and verify 24-series EEPROMs with a CH341A, right in your browser. New here? Set up the CH341A first.
Pick a name for your scratch space. Your table, edits and settings are saved in this browser as you go, so you can come back to the same computer later today and pick up where you left off.
Nothing is uploaded anywhere.
Every session on this computer is cleared daily, so
save a .bin of anything you want to keep.
.bin file, or the Level 2 practice file in one click.FF, and the table shows the blank chip (Ctrl+Z brings back what the table held). Blank check tells you whether the chip is blank without changing the table..bin.0D 0A).FF.The programmer is connected, but nothing answers on the chip's address. Check:
If the red LED goes dim when the chip is in, it's backwards: unplug USB first, then turn it around.
Level 1 chip clip: red wire to pin 1 (the dot on the chip). Level 2: borrow a minibadge adapter at the booth; it plugs into the socket the same way and your minibadge plugs into it.